How to Make a Better Strawberry Pallet Planter
Use a wooden pallet to make a Strawberry Planter
Full written and video instructions on how to make a strawberry pallet planter using a single wood pallet. Once made, you can paint it and use it for years to grow berries in your garden or on the patio. It’s a great handmade planter that not only looks great but is functional and inexpensive to make.
A Little Background on the Project
Over the past year I’ve come across scores of diy pallet projects, some of them intriguing and others not quite there yet but still having potential. One that I see time and again is the idea of using a single wooden pallet as a strawberry planter. Filled with soil and with plants inserted in the gaps they’re usually leaned up against a wall but sometimes bolted on to keep from tumbling over.
It’s a clever idea but I’ve steered away from trying it myself because I suspect that they’ll require constant watering and erosion control and also because I’m not convinced that they’ll work long term. Almost every image I’ve found of pallet planters look to be newly planted rather than a tried and tested design.
Still I was interested in the idea and with the gift of eight pristine wooden pallets, I started scouring the internet looking for alternative tutorials. Ones that offered increased stability, more soil capacity and better aesthetics. Eventually, after finding nothing that really jumped out at me, I came to the conclusion that I’d have to come up with my own design.
After thinking about the process for this post I’m quite sure that anyone who is comfortable using a hammer and hand-saw could complete this project too. Though I’ll be honest and say it’s much easier if you have a jigsaw and a few other extra tools.
It’s important to use safe pallets
First of all, choosing pallets for diy projects involves a bit of know-how. You need pallets that are in good condition, without rot, and which have not been treated with chemical insecticides. Most people are probably not aware of this but pallets that cross international borders must be either heat treated or sprayed to stop the spread of foreign pests.
Whether you think this is a good idea or not, you certainly do not want pesticide-soaked furniture or objects in your garden let alone your home. Not only can it kill off insects that eat your crops but it can indiscriminately kill all the beneficial insects too. There’s also the possibility of your plants absorbing these chemicals into their tissues and into your tasty strawberries!
To help you find the right type of pallet for your project I’ve put together a diagram of what to look for when you spot one. By international law, a pallet must be stamped twice with certain information which includes whether it’s been sprayed. Keep clear of any pallets that have been printed with the letters MB.
For this project you will also need to look for a pallet that has six or nine planks making up its main surface. The reason for this is that the first major step will be in slicing the pallet up into three equal sized pieces (both six and nine are divisable by three). If there’s such a thing as a pallet with twelve planks then all the better because that means you can build an even larger planter.
For this tutorial I’ve tried to use a series of photos to illustrate the various steps. As a beginner wood worker, it’s easier for me to understand what I’m meant to be doing if there are visuals – I hope they’ll help you too. After the main construction sequence I’ve also listed more in-depth instructions.
How to Make a Better Strawberry Planter
The dimensions of my pallet planters are: 47″ wide, 16″ across, and 19″ in height
You will need the following materials:
– Heavy duty Splitting Wedge and Iron Mallet
– Non-toxic paint and paintbrush
Step 1: Cut the pallet into three equal pieces
The easiest way to do this is to cut lay the pallet so that the long planks are in parallel with your own position. If your pallet has nine planks, like mine did, then count over three planks and then saw the wood between the third and fourth planks. Saw right in the middle, to keep things easy and to ensure that all of your proportions remain correct. Continue another three planks and cut again. Remember that you’ll have to saw in the exact places on both the front and back of the pallet.
Step 2: Trim and remove excess wood pieces
You’ll have three pieces of pallet now, all of the same height and width. Two of the pallets will be formed from the top and bottom and will have chunky blocks securely fixed to them between one of three planks on the front side and the single one left on on the other. You’ll want to trim off the excess wood jutting up from each one of these wooden blocks. Please refer to images for step one and two. Though I chose not to do it in this project, you could also remove that single plank on the back side. If you do this then you could have a deeper planter – it’s up to you.
The piece that made up the centre part of the pallet also has thick wooden blocks sandwiched between its front side and stubby planks on the other. Pull these blocks and stubby planks off but keep them in reserve – you’ll need them to complete the project. If there are nails sticking up after removing these pieces then either hammer them flat or remove them completely.
Step 3: Fix the two end pieces to the middle part of the pallet. Screw in from the other side of the middle (bottom) piece.
The two end pieces will be the sides of your planter and the middle piece is the bottom. Though the image shows the structure right way up, it’s actually easier to flip it over in order to fix the bottom piece to the sides. You’ll want to screw or nail the bottom piece into the wooden blocks still attached to the side pieces.
Step 4: You should have three to four of these pieces that were removed from the centre piece of the pallet. Separate them into individual blocks and planks.
This is easier said than done if you don’t have the right tools. Since pallet wood that has been heat treated can be brittle if you try to pull the plank off with the tongs of a hammer. If you have a heavy Splitting Wedge then I recommend that you use it to separate the block and the plank and sever the nails in two. If you’re planning on doing any more pallet projects you could really save yourself a lot of tears and invest in one along with an Iron Mallet down at your local hardware store. If any of your pieces have bits of nails sticking out then try to hammer them flat.
Step 5: Use planks to create the sides and the blocks for feet
If you’ve followed the directions in step 1 and sawed in the middle between the long planks, then the little planks leftover from step four should all be approximately the same length. They will also be the same width you need to create the shorter sides of your planter. If your original pallet was the same size as mine then you’ll have four of these planks to make up two pieces for each side. The bottom planks for each of the shorter sides can be created by re-using the bits of wood you cut off the side pieces in step two. For a more pleasing and symmetrical effect, line the small side planks up with the planks along the front and back pieces.
Attaching the wooden blocks as feet can be a bit tricky and in the end I drove very long screws in sideways to attach them to the bottom of the planter. Putting feet on the piece will help with drainage and slow down the process of the bottom rotting. I think they also make the planter look nicer.
I can foresee some people finding pallets of slightly different sizes to mine and being left with less small planks and blocks in this step. In fact it’s more likely that you’ll end up with three of each rather than four, especially if you’re using a smaller pallet. In this case you’ll be cobbling together more scraps to make and additional side piece and having to find a fourth block to use as the last foot. In this case I’d look at removing one of the inner blocks from the side pieces to use.
Step 6: Project Completed!
Well almost. Turn your planter right way up and have a look at it. Does it feel sturdy? Are the feet wobbly? Are there extra bits of wood sticking up that you could trim back? Once you feel the planter is complete then either plant it up as is or use a non-toxic outdoor wood paint to paint the exterior. Being wood, this piece will eventually rot down but some tlc now can help extend its life.
Step 7: Plant it up
Soil and compost will erode through any unprotected opening in the sides or bottom of the planter. Putting down your choice of barrier materials will help keep that soil where it’s supposed to be. I chose to line the bottom of my planter with scraps of wire then a layer of Landscaping Fabric or plastic that will let water out but keep matter in. Since I placed my planter against a hedge I also chose to roll the black material up the back since I won’t be planting any strawberries on that side. On top of the fabric and running up the sides I used straw as an organic erosion barrier.
For full planting instructions for this planter, including a video, visit this article.
Update on 14/07/2013
Here’s a before and after shot of how my planter looked on the day of construction and how it looks today. In two months the plants have grown enormously and I’m picking ripe berries every day. I’ve planted my container with two types of strawberry and the most prolific are the ever-bearing variety that should produce fruit for most of the summer.
Badger Custom Pallet
Quality • Service • Integrity
Badger Custom Pallet is your one-stop partner for shipping platforms and containers. We are dedicated to providing the products and services our customers need in the most cost-effective manner. Partnering with Badger Custom Pallet gives you access to:
- Quality wood packaging manufactured to your specifications
- On-time deliveries
- Just In Time (JIT) deliveries
- Dedicated sales, customer service, and production teams
- Vendor Managed Inventory (VMI) programs
- Consignment programs
- Stocking and holding of inventory
- Heat treat certified materials with onsite heat treatment
- Unit Load Design- examination of costs beyond the shipping platform
- Pallet Design System (PDS) software and a trained, professional sales team to safely and cost-effectively design your shipping platform
- Products that are environmentally sustainable- 100% of our wood waste and steel bi-products are recycled
To find out how Badger Custom Pallet can make shipping a hassle-free experience for your business or to get a quote, please contact us
“Badger Custom Pallet has been our single source pallet and wood packaging supplier for many years. They have always been very responsive and accommodating to our specialized wood packing requests. Their short lead times, quick response to rush orders, attention to detail, and high quality products makes BCP a strong asset to our company.”
– Corbi Plastics
450 Quality Court, Fall River, WI 53932 Phone: 920-484-6490 Fax: 920-484-6496 Copyright © 2015 Badger Custom Pallet